Aston Martin DB12 Coupe 2024 - Pre-Cut PPF
Aston Martin DB12 Coupe 2024 - Pre-Cut PPF
Couldn't load pickup availability
- Perfect for both DIY and professional installation
- Crystal-clear, premium film that keeps your car’s original look
- Precisely pre-cut to fit Aston Martin DB12 Coupe 2024
- Protects against stone chips, light scratches and everyday wear
- Installation tools included: squeegee & spray bottle (one per order)
- Free installation guides & video tutorials on our website
Installation Tools
-
PPF-Kits Microfiber Towel - 40x40 cm - 400GSM
Regular price From €5,50Regular priceUnit price per -
PPF-Kits Tack Solution Bottle
Regular price €4,50Regular priceUnit price per -
Mini Edge Tool Squeegee Bundle for Vinyl & PPF
Regular price €14,00Regular priceUnit price per -
Flexible Rubber Squeegee for PPF installation
Regular price From €4,50Regular priceUnit price per -
Lil Chizler Edge Squeegee - Blue flexible for Vinyl & PPF installation
Regular price €2,50Regular priceUnit price per -
PPF-Kits Slip Solution Bottle
Regular price From €4,50Regular priceUnit price per
More info
About this kit
The Aston Martin DB12 Coupe arrived for its launch year as what Aston Martin calls the world's first Super Tourer, and its new front end is also its most exposed feature. The grille is 54 percent larger than on the DB11 and sits low in a long nose, with the bonnet vents moved to the centre, so a broad painted surface faces oncoming grit at exactly the height where it is thrown up by traffic. Under the bonnet a hand-built 4.0-litre twin-turbo V8 with 680 PS drives the rear wheels, which means sustained high-speed cruising and the steady bombardment of motorway debris that comes with it. The fixed roof adds a front edge above the windscreen that catches chips too, and the wide rear haunches flare out right into the spray from the front wheels. A pre-cut PPF kit protects these surfaces from stone chips, scratches and daily wear.
Every part in this kit is pre-cut from a model-specific pattern for the DB12 Coupe, with the bumper and headlamps combined in one piece and clean cut-outs for the four front parking sensors. Separate bumper and side-section patterns are included for cars with the carbon fibre package, the hood and fenders come either as a full piece or as a partial one-third version, and the trunk lid is cut around the ASTON MARTIN lettering, so the PPF sits flush and follows the original lines.
We develop the cutting patterns in-house using modern 3D scanning technology and produce the pre-cut films in our own production, then ship most orders the next business day. Each kit arrives pre-weeded, so only the parts you order are on the sheet, ready for a clean DIY installation with the included squeegee and spray bottle, or a quick job at your detailer.
Which parts should you protect on your Aston Martin DB12 Coupe? It depends on whether the car is a weekend grand tourer or a daily driver, and on whether your DB12 wears the carbon fibre package.
- Full PPF coverage: the bumper and headlamps with their parking sensor cut-outs, the grille, the full hood and fenders, the mirrors, the A-pillars with the front roof edge and the roof, the left and right door, rear fender and side skirt sections, the rocker panels, the door handles, the trunk lid, the taillights and rear bumper, the luggage area and the door sills, each in the standard or carbon fibre package version where offered.
- Front-end protection: the bumper and headlamps, the grille, the hood and fenders or the one-third hood and fender option, the mirrors and the A-pillar and front roof section, which together face the grit that the long nose meets at speed.
- Daily-use essentials: the door handles, the door sills, the luggage area and the rocker panels, where fingernails, shoes, luggage and kerbside spray leave their marks first.
For a car in this class, a premium self-healing TPU film is the safe choice: it stays optically clear and lets fine scratches heal with heat. You can compare every film in the material guide below.
Compare the cutting patterns shown in our shop with your vehicle. The cut-outs for the parking sensors and the panel shapes usually make the right fit obvious, even without experience. Still unsure? Send us a photo via the contact form or 24/7 live chat.
Questions
FAQ
Does the PPF really fit my exact car model?
Yes. Our kits are based on millimeter-precise 3D scans of real vehicles. The scan data is converted into mathematically accurate 2D patterns, ensuring a precise and guaranteed fit.
If a Film appears not to fit, it is usually due to the wrong kit being ordered, an installation issue (e.g. wrong installation environment, temperature too cold, or not enough stretching), or another application error.
If you're unsure about your model, send us a photo or details via Live Chat and we'll double-check before shipping.
Are the Edges wrapped?
Yes, whenever possible. Our patterns are designed so the Film can be wrapped around the edges of panels wherever it is possible without disassembling the car and where a usable edge exists.
For parts like hoods, fenders, doors, and trunk lids, edges are almost always wrapped. You can also check this in our product images, which show the exact coverage.
In some areas wrapping is physically not possible. For example, the gap between a fender and bumper or between a fender and door is often too small to insert the Film without removing parts.
Professional installers who work with bulk Film sometimes disassemble parts of the car to wrap deeper inside, but this is usually done only for very high-end installations.
How long does Production & Shipping take?
We usually ship your order the next business day. All Films are produced after your order is placed.
If we experience very high order volume, production may take one additional day. In case of material shortages or other delays, we will inform you immediately.
Shipping is free for orders over €100 in most EU countries, and delivery within the EU typically takes about 1–4 days.
You can find more details on our Shipping page
What if I can't find a Kit for my Car?
If your vehicle is not listed, simply reach out to us. You may have missed it or it may not be released yet. Sometimes we already have the patterns but they are not yet published in the shop.
If we truly don't have your vehicle yet, we can source the car, scan it in 3D and create precise Pre-Cut patterns, which are then added to our Store.
Learn more in our Knowledge Base
How to remove PPF later?
PPF can be safely removed without damaging your paint. Warm the film slightly with a hair dryer or heat gun and peel it off slowly at a 45° angle. Any residue can be cleaned with adhesive remover or isopropyl alcohol.
Read more about it in our Knowledge Base
How long does the PPF last?
Our standard Film protects your paint for 4–6 years, depending on exposure and care. Premium TPU films can last up to 10 years. They resist scratches, yellowing, and UV damage keeping your paint looking new.
Please check out our Material Selection guide to find the Film that fits your needs.
Can I install the Films by myself?
Probably. Our Pre-Cut PPF-Kits are precisely cut to size.
If you're handy, patient, and enjoy working on your own car, you can save a lot of money compared to professional installation.
We include basic instructions to guide you through handling and applying the film. All essential tools: a squeegee and a spray bottle are included once per order.
Check out our YouTube videos for Installation Tips & Tricks.
There is a lot of Information online and on YouTube. Do your research before installing the first time.
If you've worked with vinyl or window tint before, the process will feel familiar. It's not effortless, but with care and patience, it's absolutely doable and very rewarding to install it yourself and see the result of your own work.
How your Pre-Cut Kit is Made & Delivered
Production of your Pre-Cuts
Our high-precision plotters cut each piece exactly as ordered. Every sheet is carefully inspected to ensure an excellent result.
Inspection & Packaging
Each kit is securely packed for safe transport. It includes the standard installation tools as well as any extras you added to your order.
Unpacking
After unpacking, please inspect all sheets carefully for possible damage. If you notice any issues, contact us immediately via live chat before starting the installation.
Preparing your Car
Before applying, thoroughly wash and degrease your car. Make sure the surface is completely free of insects, oil, or dust for the best possible results.
Learn
View our Knowledge Base
XPENG G6 & G9 PPF: The Complete Paint Protection Film Guide
Where the XPENG G6 and G9 chip first, the door-sill piece owners forget, facelift fitment, PPF vs ceramic, real kit prices and DIY tips.
Zeekr 7X PPF: The Owner's Guide to Protecting Your Paint
Where the Zeekr 7X chips first, the sills owners forget, matte satin PPF, PPF vs ceramic, real kit prices and DIY install tips.
Leapmotor C10 PPF: Pre-Cut Paint Protection Film Guide (BEV & REEV)
Where the Leapmotor C10 chips first, the door-sill and rocker pieces owners forget, how to open the hood, PPF vs ceramic, real kit prices and DIY tips.